Congratulations on your ownership of Phlips HeartStart home defibrillator laptop for the latest on the market. The Philips Onsite works best when paired with HeartStart SMART Pads. The bearings are very easy to use, but in an emergency situation, nurses often forget their training or be angry. If you remember the simple steps in this article to install the pads and deliver a shock if needed. The bearings areon the front of the defibrillator.
For access to the pad, there is a handle on top. Pull the pad from the site will automatically turn on the defibrillator and get it going. The nurses receive audio instructions first you know, the pads are properly positioned on the patient and the device is receiving data. The bearings are very easy to use and, together with audible instructions and illustration on the front page will help you, easy to installthe pads on the patient. The pads are not specific for left, right, up or down. However, you need a pad placed over the right breast and depicted the second pad under the left breast as a cassette on the pad. Always in a manual, which is obtained from the manufacturer or a certification of the class of an authorized trainer. For your convenience, we have the following steps to help you through the process.
Keep calm - more than any other step, this is probably theimportant. If you are not quiet and somewhat unpredictable, you are not able to think normally and the errors that lead to Help .. Demand that the 911 emergency services were called to the scene. Drag the green square of SMART Pads Remove all clothing from the patient's chest. Rip to reduce or, if necessary Remove protective film from bearing the seal and place the first pad on bare skin on the right side above the breast and place the second pad on the right side under the breast. TheOnsite will automatically detect that the pads are attached to the patient and begin analyzing the patient's heart rhythm to determine if a shock is required.
If a shock is required the caution light turns a solid orange and the Shock button starts flashing. The defibrillators will provide an audible warning telling the caregiver and those around not touch the patient while a shock is sent from the device.
The HeartStart OnSite defibrillator will not deliver a shock unless you press the flashing orange Shock button. If you do not press the Shock button within 30 seconds after the device tells you to, it will disarm itself. After you have removed the onsite defibrillator pads from the patient they must be discarded. They cannot be reused. To guarantee that your Onsite defibrillator is ready for the next emergency you should immediately purchase new pads from an authorized Philips retailer.
In addition, Philips Adult HeartStart Onsite pads have a two year shelf life meaning that once they have expired you must immediately purchase new ones. If you own a defibrillator you should regularly check our device to verify that it's functioning properly and the pads are within their expiration date. If the pads have expired, or are near expiration replace them immediately. It's easy to forget how to use your Philip SMART Pads during an emergency, but if you remain calm and follow the verbal and audible voice prompts from the Onsite AED you will be able to easily place the pads on the patient and begin saving a life.
No comments:
Post a Comment